| |
Product Description
|
| Dimension (mm) |
Length |
Width |
Thickness |
3000-12000 |
1000-1250 |
8-40 |
H.R Steel Plate |
3000-12000 |
1000-1250 |
41-150 |
Steel Thin Slab |
| |
|
|
|
Products are mainly Structural steels, according to JIS G3106, EN 10025, DIN17100 and equivalent standards, with ability to produce low alloy & Carbon steels. Products deliver in as –rolled condition with natural edge and untreated..
|
| |
EN 10029
Nominal Dimensions, Tolerances
Thickness:
(Dimensions in mm) |
| |
Maximum
Thickness difference
Within width |
Tolerances on the nominal Thickness |
Nominal
Thickness |
Class D |
Class C |
Class B |
Class A |
Lower |
Upper |
Lower |
Upper |
Lower |
Upper |
Lower |
Upper |
0.9 |
-0.85 |
+0.85 |
0 |
+1.7 |
-0.3 |
+1.4 |
-0.5 |
+1.2 |
8 < 15 ≤ |
1.0 |
-0.95 |
+0.95 |
0 |
+1.9 |
-0.3 |
+1.6 |
-0.6 |
+1.3 |
15 < 25 ≤ |
1.1 |
-1.1 |
+1.1 |
0 |
+2.2 |
-0.3 |
+1.6 |
-0.8 |
+1.4 |
25 < 40 ≤ |
1.2 |
-1.4 |
+1.4 |
0 |
+2.8 |
-0.3 |
+2.5 |
-1.0 |
+1.8 |
40 < 80 ≤ |
1.3 |
-1.6 |
+1.6 |
0 |
+3.2 |
-0.3 |
+2.9 |
-1.0 |
+2.2 |
80 < 150 ≤ |
1.4 |
-1.8 |
+1.8 |
0 |
+3.6 |
-0.3 |
+3.3 |
-1.2 |
+2.4 |
150 < 200 ≤ |
|
| |
Note: Products will be delivered on class D if it had not been specified by customer.
|
| |
Width:
(Dimensions in mm) |
| |
اTolerances |
Nominal Width |
Lower |
Upper |
0 |
+20 |
1000-1250 |
|
| |
Tolerances on width can be the subject of agreement between the manufacturer and purchaser at the time of ordering.
|
| |
Length:
(Dimensions in mm) |
Tolerances |
Nominal Length |
Plate
|
Lower |
Upper |
0 |
+20 |
3000 < 4000 ≤ |
0 |
+30 |
4000 < 6000 ≤ |
0 |
+40 |
6000 |
0 |
+100 |
> 6000 |
|
| |
For thin slab tolerances lower (0) Upper (+100)
For Length more than 12000mm and less than 3000mm, shall be the subjects of agreement between the manufacturer and purchaser at the time of ordering. |
| |
Length:
Weight Tolerances based on EN-10029 |